STF - HT Fornaci Tubolari

Close

Lingua:

STF 16/180STF 15/610 with 3216P1 programmer and L stand option

The Carbolite Gero STF single zone and TZF 3-zone high temperature tube furnace range is available at 1500 °C and 1600 °C with both models using silicon carbide heating elements.

This range of tube furnaces does not include an integral work tube and one must be selected as an additional item. The work tube length is dependent on the application eg for use with modified atmosphere or vacuum.

The TZF 3-zone high temperature tube furnace has heated lengths of 450 and 610 mm. An extended uniform zone in the mid-section of the work tube is achieved with the use of end zone controllers which track the centre zone temperature and compensate for the loss of heat from the tube ends.

caratteristiche standard

  • temperatura massima operativa tra 1500°C e 1600°C
  • Single zone models fitted with Carbolite Gero 301 PID controller with single ramp to setpoint and process timer
  • 3-zone models fitted with 1 x programmable 3216P1 and 2 x 3216CC end zone controllers, with retransmission of setpoint
  • Accetta tubi di lavoro con diametro esterno fino a 60 o 90 mm in funzione del modello
  • Heated lengths, single zone 180, 450 or 610 mm (STF)
  • Heated lengths, 3-zone 450 or 610 mm (TZF)
  • Elementi riscaldanti in Carburo di silicio
  • Configurazione orizzontale

Opzioni (specificare all'ordine)

  • E' disponibile un ampio range di sofisticati controller digitali, programmatori multi-segmento e data loggers, che possono essere collegati tramite RS232, RS485 o Ethernet.
  • Protezione Over-temperature (consigliata per proteggere il contenuto di valore e per operatività senza sorveglianza) 
  • Opzioni di montaggio alternative disponibili
  • Opzionalmente configurati per motori 2 fase o 3 fase (in funzione del modello)
  • A range of additional work tubes, end seals and work tube packages is available for use with modified atmosphere and/or vacuum
  • Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
  • Ampia scelta di materiali e diametri dei tubi: es quarzo, ceramica, metallo
  • Spine di isolamento e schermi radianti per la prevenzione di perdita di calore e per miglioramento dell'uniformità 
  • Control module with 2 meter conduit to furnace (TZF)
  • Hook and strap work tube support

Contenuto soggetto a modifiche od errori